Okay, so Real Cedar boasts greater beauty and more versatility than man-made materials – few would argue that point. But, looks alone don’t paint the entire picture. There are many other beneficial considerations to factor into your decision-making process. You might want to consider, for example, that when homeowners choose natural wood over synthetic substitutes, they’re actually doing the planet and their pocketbooks a huge favour. That’s because independent studies have determined that wood outperforms steel, concrete and composites in the following categories:
Wood products require much less energy to produce than concrete or steel – that’s according to an independent study that compared how much energy is needed to obtain, manufacture, transport and instal building materials for identical wood frame, steel frame and concrete houses. These findings prove, once and for all, that wood is environmentally superior to alternative materials. Additionally, wood possesses naturally occurring thermal properties, so it saves even more energy (not to mention money) when it comes to heating and cooling homes.
As the world’s only renewable building material, wood can not only be recycled, but regenerated as well. In fact, lumber producers have been replacing harvested trees so diligently in that last few decades that North American forests have actually grown 20% since 1970. Man-made materials, on the other hand, cannot be broken down or renewed and the only things they help grow are landfills and ozone holes.
Wood-product manufacturing produces far fewer toxins and greenhouse gasses than the leading man-made materials. Which means wood has the lowest impact on air and water quality. This is especially true when compared to the manufacturing of recycled steel. Furthermore, forest regeneration also creates more trees, which benefit the environment while they grow because they take in carbon dioxide and release oxygen.
To learn more, please visit our Resource Library and download the Go Green brochure.
One third of the energy used in North America is used to heat, cool and operate the buildings we live and work in. As most energy is produced from non-renewable fossil fuels that produce greenhouse gasses, reducing energy use in a building will lower its environmental impact. This can be accomplished by low energy lighting, passive ventilation systems, and minimising a building’s heating and cooling needs. The materials and construction of a building have a significant impact on the last category: minimising heating and cooling needs.
Wood has very good insulating value compared to other materials. Laboratory tests conducted at the National Research Council of Canada and the Oak Ridge National Laboratory show that light metal framing significantly reduces the effective thermal resistance, or R-value, of a wall assembly resulting in increased energy use (Figure 1). Wood-frame construction is easy to insulate to high standards. In fact, several wood-frame assemblies have been designed for the Arctic.
Wood-frame construction can easily be adapted to any energy code requirement. This means wood frame houses, offices, schools, and other commercial and industrial buildings can keep energy usage for heating and cooling low.
For more detailed information on the energy efficiency advantages of wood, see the article The Thermal Performance of Light-Frame Assemblies.
In evaluating the environmental impact of building design, the impact on the quality of air, water and soil must be taken into consideration. This includes not only minimising waste products from the building, such as wastewater, solid wastes and chemicals, but also minimising the pollution caused by the manufacture of the materials used in the building.
It is difficult, however, for designers to determine whether the materials they choose cause air or water pollution during their extraction, manufacture and transportation to the site as these occur away from the project. Designers may be aware that concrete manufacture creates CO2 emissions and that steel manufacture results in toxic chemicals being released into the water, but are not aware of a means to evaluate these effects. Life cycle analysis is an emerging science that evaluates and allows designers to compare the effect that materials have on the environment over their lifetime.
In Canada, the ATHENA™ Sustainable Materials Institute has developed databases and a computer programme to evaluate the environmental impacts of whole buildings and building assemblies. In the US, the federal government has funded the first phase of a project, led by the ATHENA™ Sustainable Materials Institute, to develop a life-cyle inventory for a range of materials including building materials and products. The second phase of the project is now getting underway.
ATHENA™’s life-cycle research proved what designers knew intuitively, and what has been demonstrated in comparable work in Europe: when it comes to minimising external pollution of air, water or soil, wood far surpasses other materials. The research demonstrated that using wood results in:
The next section, A Life Cycle Approach to Building Design, provides further explanation about life cycle analysis and how wood building products have the lowest environmental impact when compared to other major building materials.
Embodied energy includes all energy, direct and indirect, used to extract, manufacture, transport and instal materials. This principle aims to lower the energy used, not only during service life, which tends to be in the control of the designer, but also for producing the materials. This is another area where life-cycle analysis can provide the research required for informed choices.
The manufacture of wood uses very little energy so, even though it may be brought to the building site from outside the area, the embodied energy will normally be less than locally manufactured concrete. Life-cycle comparisons demonstrate that wood has low embodied energy and is an excellent choice to meet this principle.
This principle also encompasses reducing the depletion of resources by minimising the amount of resources used and, in particular, the amount of non-renewable resources used.
Wood is the only major building material that is renewable. Canada’s sustainably managed forests ensure that there is an ample supply. New manufacturing technology allows every part of the tree to be used so that nothing is wasted. Advanced engineered wood products make use of fast growing species to produce high strength products without requiring large dimension timbers to meet building needs. In addition, engineered building systems, such as trusses, allow larger clear spans while reducing the amount of material required.
Wood is also durable which means that the materials will last for a long time and not need to be replaced. Churches in Norway and temples in Japan have lasted over a thousand years. In North America, there are many examples of historic wood buildings from the 16th century that are still standing. Even the foundation of the Empire State Building rests on wood piles!
In fact, not only does wood last, but there are many examples of new buildings that have used wood reclaimed from decommissioned buildings. This is the ultimate in reducing the consumption of materials, but even the use of new wood gives it a significant advantage over other materials. Wood is the only major building material that is renewable – a reason why Canada’s forest base is still abundant after 150 years of harvesting. Wood is natural, biodegradable, recyclable, and originates from Canada’s sustainably managed forests.
This green building principle deals with the health of the indoor environment.
Wood is a natural material and wood construction has over a century of proven performance. It can serve a functional application (structural) and also often serves as a finish material because of its aesthetic appeal. For example, timber frame construction offers amazing architectural potential and wood flooring is renowned as a feature that wears well and minimises the accumulation of dust and microbes. And the engineered wood products used for sheathing and for beams and joists are made with glues that don’t contribute to allergies.
Green building rating systems are being applied more and more. Wood is a naturally occurring and renewable material that excels under the scrutiny of green building review. Canadian wood measures up to the requirements and comes out the winner in all aspects when compared to other materials. Wood reduces energy use, minimises external and internal pollution and is the only material that comes from a sustainable resource. Wood is the natural choice for building environmentally safe and secure homes and buildings.
For more information:
Environmental Building News
Canadian Wood Council
LEED™ (Leadership in Energy and Environmental Design) Green Building Rating System